CANUSB Projects

CAN Monitor for CANUSB with D2XX and CANUSB DLL.

CAN Monitor Lite is a free version from WGSoft. Built using CANUSB API DLL (with D2XX USB drivers) and Delphi 2005. Package only includes the executable file, no source is included. This means you need to install the CANUSB with D2XX drivers and download the CANUSB DLL (See Downloads). The software is provided as is and may be used for free. This is a perfect software to log and send 11bit CAN frames.

Currently LAWICEL cannot answer any support related questions, please contact the vendor WGSoft for support.

Use the 3:rd icon from the left on the toolbar to set CAN Speed etc. then open CANUSB driver with the 1:st icon and then press the green "play button" and you are ready to log frames or/and send frames.

Download Software:

WGSoft CAN Monitor Ver. 1.00

If you have any projects made with CANUSB and want to display them here, please contact us and we will be happy to put them here either on our server or a link to yours. It could be for Visual Basic, Delphi, C, C++, Linux, Windows, PDA's or other embedded projects. It doesn't need to include source code (though we like that). It could be an executable, picture or a story. We will give you full credit for the work. Use the e-mail below to contact us, just make sure you replace the [AT] to @ and the [DOT] to a period. We use this to minimize SPAM robots to search for valid e-mail adresses.

projects[AT]canusb[DOT]com

  

© Copyright 1997-2008 LAWICEL AB www.lawicel.com All rights reserved.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Last updated on the 23:rd of January 2008